VW Automatic Transmission Basic Settings: Difference between revisions
Jump to navigation
Jump to search
m Mr-fix moved page DL501 basic settings to VW Automatic Transmission Basic Settings: New title |
No edit summary |
||
| Line 1: | Line 1: | ||
==Transverse== | |||
===DQ200=== | |||
===DQ250=== | |||
===DQ351=== | |||
//TODO | |||
==Longitudinal== | |||
===DL501=== | |||
# Ignition on, engine off | # Ignition on, engine off | ||
# Module <code>0x02 Transmission</code> → <code>Basic Settings</code> → <code>Erase counter for start/stop procedure</code> | # Module <code>0x02 Transmission</code> → <code>Basic Settings</code> → <code>Erase counter for start/stop procedure</code> | ||
Revision as of 08:34, 3 August 2025
Transverse
DQ200
DQ250
DQ351
//TODO
Longitudinal
DL501
- Ignition on, engine off
- Module
0x02 Transmission→Basic Settings→Erase counter for start/stop procedure - Erase counter for start/stop procedure
- Engine on
- Module
0x02 Transmission→Basic Setting→Clutch valve calibration - Module
0x02 Transmission→Basic Setting→Distance sensor calibration - Ignition on, engine off
- Module
0x02 Transmission→Basic Setting→Reset start point of adaptation to factory settings - Engine on
- Module
0x02 Transmission→Basic Setting→Clutch engagement point adaptation - Module
0x02 Transmission→Advanced measuring values→Adaptation status of the engagement point 1andAdaptation status of the engagement point 2 - Drive the vehicle and observe status of the two above channels until status shows both as
broken in.