VW Automatic Transmission Basic Settings: Difference between revisions
Jump to navigation
Jump to search
Created page with "# Ignition on, engine off # Module <code>0x02 Transmission</code> → <code>Basic Settings</code> → <code>Erase counter for start/stop procedure</code> # Erase counter for start/stop procedure # Engine on # Module <code>0x02 Transmission</code> → <code>Basic Setting</code> → <code>Clutch valve calibration</code> # Module <code>0x02 Transmission</code> → <code>Basic Setting</code> → <code>Distance sensor calibration</code> # Ignition on, engine off # Module <cod..." |
m Mr-fix moved page DL501 basic settings to VW Automatic Transmission Basic Settings: New title |
(No difference)
| |
Revision as of 09:32, 3 August 2025
- Ignition on, engine off
- Module
0x02 Transmission→Basic Settings→Erase counter for start/stop procedure - Erase counter for start/stop procedure
- Engine on
- Module
0x02 Transmission→Basic Setting→Clutch valve calibration - Module
0x02 Transmission→Basic Setting→Distance sensor calibration - Ignition on, engine off
- Module
0x02 Transmission→Basic Setting→Reset start point of adaptation to factory settings - Engine on
- Module
0x02 Transmission→Basic Setting→Clutch engagement point adaptation - Module
0x02 Transmission→Advanced measuring values→Adaptation status of the engagement point 1andAdaptation status of the engagement point 2 - Drive the vehicle and observe status of the two above channels until status shows both as
broken in.