MQB TPMS High retrofit
7K3 - TPMS High 433MHz 7K4 - TPMS High 315MHz
Parts
Wiring
- Power from fusefolder C, fuse no. 7
- Ground from right side of luggage compartment
- CAN-BUS extended from gateway (J533)
Coding
Gateway
// configure gateway so it knows that there's new hardware in the CAN-BUS. Gateway (0x19) → Adaptation → Installation list → Tire Pressure Monitoring 1 → coded
Instrument Cluster
ABS
Infotainment
// receiving data on Extended CAN-BUS Infotainment (0x5F) → Adaptation → Car Function List BAP Gen2 → tire pressure system 0x07 msg bus → Databus Extended Infotainment (0x5F) → Adaptation → Car Function List BAP Gen2 → tire pressure system 0x07 → Active // showing GUI in the CAR menu Infotainment (0x5F) → Adaptation → Car Function Adaptations Gen2 → Menu display rdk → Activated Infotainment (0x5F) → Adaptation → Car Function Adaptations Gen2 → Menu display rdk over threshold high → Activated Infotainment (0x5F) → Adaptation → Car Function Adaptations Gen2 → Menu display rdk standstill→ Not activated