MQB Side Assist retrofit
7Y1 - Lane change assist 79B - Lane change system, lane keeping system and traffic jam assist 79D - Lane change assist, lane keeping system, traffic jam assist, and emergency assist 7Y5 - Lane change system, lane keeping system / lane departure warning
Parts
Audi A3 8V
Radars:
3Q0-907-566-D/F/H/J- radar module (J769 -MASTER-), right, facelift3Q0-907-590-D/F/H/J- radar module (J770 -SLAVE-), left, facelift
Mounting brackets:
- 8V5 907 175 - radar mounting bracket, left, sedan
- 8V5 907 176 - radar mounting bracket, right, sedan
Indicators:
8V1-949-145- Mirror indicator, left, before facelift, LHD8V1-949-146- Mirror indicator, right, before facelift, LHD
8V2-949-145- Mirror indicator, left, before facelift, RHD8V2-949-146- Mirror indicator, right, before facelift, RHD
8V1-949-145-A- Mirror indicator, left, facelift, LHD8V1-949-146-A- Mirror indicator, right, facelift, LHD
8V2-949-145-A- Mirror indicator, left, facelift, RHD8V2-949-146-A- Mirror indicator, right, facelift, RHD
Mirror Caps:
8V0-857-527-E- Mirror Cap, left8V0-857-528-E- Mirror Cap, right
Wiring Loom:
8V0-971-104-N- Wiring harness, sedan, with 6 PDC sensors
Wiring
Firmware
Coding
Compiled completed coding guide from public sources. [1]
Gateway
// configure gateway so it knows that there's new hardware in the CAN-BUS. Gateway (0x19) → Adaptation → Installation list → Lane Change Assistant → coded Gateway (0x19) → Adaptation → Installation list → Lane Change Assistant 2 → coded
Instrument Cluster
Instrument Cluster (0x17) → Long Coding → Byte 05 → Bit 3 (Lane Change Assistant, installed) → Enable Instrument Cluster (0x17) → Long Coding → Byte 11 → Bit 3 (Lane Change Assistant, BAP distance) → Enable
Lane Change Assistant
Lane Change Assistant (0x3C) → Long Coding → Byte 00 → Bit 2 (RTCA, active) → Enable Lane Change Assistant (0x3C) → Long Coding → Byte 02 → Bits 0-7 (?) → Enable