MQB Side Assist retrofit: Difference between revisions

From mr-fix.info Wiki
Jump to navigation Jump to search
No edit summary
Line 36: Line 36:


== Wiring ==
== Wiring ==
//TODOOO


== Firmware ==
== Firmware ==

Revision as of 16:46, 15 November 2026

7Y1	- Lane change assist		
79B	- Lane change system, lane keeping system and traffic jam assist
79D	- Lane change assist, lane keeping system, traffic jam assist, and emergency assist
7Y5 	- Lane change system, lane keeping system / lane departure warning

Parts

Audi A3 8V

Radars:

  • 3Q0-907-566-D/F/H/J - radar module (J769 -MASTER-), right, facelift
  • 3Q0-907-590-D/F/H/J - radar module (J770 -SLAVE-), left, facelift

Mounting brackets:

  • 8V5 907 175 - radar mounting bracket, left, sedan
  • 8V5 907 176 - radar mounting bracket, right, sedan

Indicators:

  • 8V1-949-145 - Mirror indicator, left, before facelift, LHD
  • 8V1-949-146 - Mirror indicator, right, before facelift, LHD
  • 8V2-949-145 - Mirror indicator, left, before facelift, RHD
  • 8V2-949-146 - Mirror indicator, right, before facelift, RHD
  • 8V1-949-145-A - Mirror indicator, left, facelift, LHD
  • 8V1-949-146-A - Mirror indicator, right, facelift, LHD
  • 8V2-949-145-A - Mirror indicator, left, facelift, RHD
  • 8V2-949-146-A - Mirror indicator, right, facelift, RHD

Mirror Caps:

  • 8V0-857-527-E - Mirror Cap, left
  • 8V0-857-528-E - Mirror Cap, right

Wiring Loom:

  • 8V0-971-104-N - Wiring harness, sedan, with 6 PDC sensors

Wiring

//TODOOO

Firmware

Coding

Compiled completed coding guide from public sources. [1] [2]

Gateway

// configure gateway so it knows that there's new hardware in the CAN-BUS.
Gateway (0x19) → Adaptation → Installation list → Lane Change Assistant → Coded
Gateway (0x19) → Adaptation → Installation list → Lane Change Assistant 2 → Coded

ABS

// below instruction is for 30-bit version of the ABS module.
// make sure that it applies to your config

ABS (0x03) → Long Coding → Byte 29 → Bit 7 (RCTA, Installed) → Enable

Park Assist

Park Assist (0x10 or 0x76) → Long Coding → Byte 03 → Bit 6 (RTCA warning level, installed) → Enable

Instrument Cluster

Instrument Cluster (0x17) → Long Coding → Byte 05 → Bit 3 (Lane Change Assistant, installed) → Enable
Instrument Cluster (0x17) → Long Coding → Byte 11 → Bit 3 (Lane Change Assistant, BAP distance) → Enable

Lane Change Assistant

// Enabling Rear Cross-Traffic Assist
Lane Change Assistant (0x3C) → Long Coding → Byte 00 → Bit 2 (RTCA, active) → Enable
Lane Change Assistant (0x3C) → Long Coding → Byte 02 → Bits 0-7 (RCTA Tone) → Tone via PLA

Infotainment

// receiving data
Infotainment (0x5F) → Adaptation → Car Function List BAP Gen2 → SWA 0x1A msg bus → Terminal 15
Infotainment (0x5F) → Adaptation → Car Function List BAP Gen2 → SWA 0x1A → Active

// showing GUI in the CAR menu
Infotainment (0x5F) → Adaptation → Car Function Adaptations Gen2 → Menu display lane assistant → Activated
Infotainment (0x5F) → Adaptation → Car Function Adaptations Gen2 → Menu display lane assistant over threshold high → Activated

Assistnat Camera

Assistnat Camera (0xA5) → Long Coding → Byte ?? → Bit ? (SWA, coded) → Enable

Component Protection

// TODOOO

Basic Settings

// TODOOO