MQB Side Assist retrofit: Difference between revisions
Jump to navigation
Jump to search
| Line 57: | Line 57: | ||
=== Lane Change Assistant === | === Lane Change Assistant === | ||
// Enabling Rear Cross-Traffic Assist | |||
Lane Change Assistant (0x3C) → Long Coding → Byte 00 → Bit 2 (RTCA, active) → Enable | Lane Change Assistant (0x3C) → Long Coding → Byte 00 → Bit 2 (RTCA, active) → Enable | ||
Lane Change Assistant (0x3C) → Long Coding → Byte 02 → Bits 0-7 ( | Lane Change Assistant (0x3C) → Long Coding → Byte 02 → Bits 0-7 (RCTA Tone) → Tone via PLA | ||
=== Infotainment === | |||
// receiving data | |||
Infotainment (0x5F) → Adaptation → Car Function List BAP Gen2 → SWA 0x1A msg bus → Terminal 15 | |||
Infotainment (0x5F) → Adaptation → Car Function List BAP Gen2 → SWA 0x1A → Active | |||
// showing GUI in the CAR menu | |||
Infotainment (0x5F) → Adaptation → Car Function Adaptations Gen2 → Menu display lane assistant → Activated | |||
Infotainment (0x5F) → Adaptation → Car Function Adaptations Gen2 → Menu display lane assistant over threshold high → Activated | |||
== Basic Settings == | == Basic Settings == | ||
Revision as of 16:13, 15 November 2026
7Y1 - Lane change assist 79B - Lane change system, lane keeping system and traffic jam assist 79D - Lane change assist, lane keeping system, traffic jam assist, and emergency assist 7Y5 - Lane change system, lane keeping system / lane departure warning
Parts
Audi A3 8V
Radars:
3Q0-907-566-D/F/H/J- radar module (J769 -MASTER-), right, facelift3Q0-907-590-D/F/H/J- radar module (J770 -SLAVE-), left, facelift
Mounting brackets:
- 8V5 907 175 - radar mounting bracket, left, sedan
- 8V5 907 176 - radar mounting bracket, right, sedan
Indicators:
8V1-949-145- Mirror indicator, left, before facelift, LHD8V1-949-146- Mirror indicator, right, before facelift, LHD
8V2-949-145- Mirror indicator, left, before facelift, RHD8V2-949-146- Mirror indicator, right, before facelift, RHD
8V1-949-145-A- Mirror indicator, left, facelift, LHD8V1-949-146-A- Mirror indicator, right, facelift, LHD
8V2-949-145-A- Mirror indicator, left, facelift, RHD8V2-949-146-A- Mirror indicator, right, facelift, RHD
Mirror Caps:
8V0-857-527-E- Mirror Cap, left8V0-857-528-E- Mirror Cap, right
Wiring Loom:
8V0-971-104-N- Wiring harness, sedan, with 6 PDC sensors
Wiring
Firmware
Coding
Compiled completed coding guide from public sources. [1]
Gateway
// configure gateway so it knows that there's new hardware in the CAN-BUS. Gateway (0x19) → Adaptation → Installation list → Lane Change Assistant → coded Gateway (0x19) → Adaptation → Installation list → Lane Change Assistant 2 → coded
Instrument Cluster
Instrument Cluster (0x17) → Long Coding → Byte 05 → Bit 3 (Lane Change Assistant, installed) → Enable Instrument Cluster (0x17) → Long Coding → Byte 11 → Bit 3 (Lane Change Assistant, BAP distance) → Enable
Lane Change Assistant
// Enabling Rear Cross-Traffic Assist Lane Change Assistant (0x3C) → Long Coding → Byte 00 → Bit 2 (RTCA, active) → Enable Lane Change Assistant (0x3C) → Long Coding → Byte 02 → Bits 0-7 (RCTA Tone) → Tone via PLA
Infotainment
// receiving data Infotainment (0x5F) → Adaptation → Car Function List BAP Gen2 → SWA 0x1A msg bus → Terminal 15 Infotainment (0x5F) → Adaptation → Car Function List BAP Gen2 → SWA 0x1A → Active // showing GUI in the CAR menu Infotainment (0x5F) → Adaptation → Car Function Adaptations Gen2 → Menu display lane assistant → Activated Infotainment (0x5F) → Adaptation → Car Function Adaptations Gen2 → Menu display lane assistant over threshold high → Activated