Power boot retrofit: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
I'm wondering if it's possible to retrofit power boot into Audi A3 8V sedan? Just like in other VAG sedans - Audi A8 or A6 or A4 or VW Passat? And since Passat is also made on MQB platform, I'm going to assume that it will work in A3 with a help of Audi Q2 or Q3 parts. Hope that I'm right... | |||
[[Category:Audi A3 8V]] | Retrofitting in limousine/sedan body it should be simpler than in hatchback or sportback, since there are no struts. Will it be enough to replace the boot balancing spring with servo motor, replace the trunk lock with soft-close one, add the module, add wiring, closing button, perform coding, basic settings...? | ||
Ok. Actually it's a lot. But it should be possible! | |||
== Schematics == | |||
TODO | |||
== Parts == | |||
=== Servo === | |||
There's couple version of the Stabilus Powerise servo motor that operates boot in VAG sedans:<ref>https://www.drive2.ru/l/609822135187163464/</ref> | |||
* 3G5-827-851 from VW Passat B8 | |||
* 4G5-827-851-B from Audi A6 C7 | |||
* 4K5-827-851-C from Audi A6 C8 | |||
* 4N0-827-851-A from AUdi A8 D5 | |||
The cheapest would be the best. I don't need much torque in Audi A3 8V - my trunk door should be lighter than the one in Passat. | |||
=== Trunk module=== | |||
* 5Q0-959-107-F /K from VW Passat B8 | |||
* xxx-xxx-xxx from Audi Q2 or Q3 ? | |||
=== Trunk lock === | |||
* 81A-827-506 from Audi Q2 and Q3 | |||
=== Wiring === | |||
* 3G5-971-147-AP from VW Passat B8 | |||
* xxx-xxx-xxx from Audi Q2 and Q3? | |||
=== Buttons === | |||
I want to have while backlight in both the trunk closing button (trunk door) and trunk opening button (drivers door). | |||
* xxx-xxx-xxx from Audi A3 8V facelift | |||
* xxx-xxx-xxx from Audi Q2 and Q3? | |||
=== Kick-open sensor === | |||
This is optional. | |||
* 3G0-962-243<ref>https://bt-cars.pl/silowniki/20710-vw-passat-b8-sedan-klapa-elektryczna-bagaznika-5q0959107f-3g0959831b-3g5827851-3g0962243-silownikow-klapy-silownik-zestaw-3g.html</ref> | |||
=== Warning buzzer === | |||
* xxx-xxx-xxx ??? | |||
== Installation == | |||
TODO | |||
== Coding & adaptation == | |||
TODO | |||
== Basic settings == | |||
TODO | |||
[[Category:Audi A3/S3/RS3 (8V)]] | |||
Revision as of 19:21, 27 January 2025
I'm wondering if it's possible to retrofit power boot into Audi A3 8V sedan? Just like in other VAG sedans - Audi A8 or A6 or A4 or VW Passat? And since Passat is also made on MQB platform, I'm going to assume that it will work in A3 with a help of Audi Q2 or Q3 parts. Hope that I'm right...
Retrofitting in limousine/sedan body it should be simpler than in hatchback or sportback, since there are no struts. Will it be enough to replace the boot balancing spring with servo motor, replace the trunk lock with soft-close one, add the module, add wiring, closing button, perform coding, basic settings...?
Ok. Actually it's a lot. But it should be possible!
Schematics
TODO
Parts
Servo
There's couple version of the Stabilus Powerise servo motor that operates boot in VAG sedans:[1]
- 3G5-827-851 from VW Passat B8
- 4G5-827-851-B from Audi A6 C7
- 4K5-827-851-C from Audi A6 C8
- 4N0-827-851-A from AUdi A8 D5
The cheapest would be the best. I don't need much torque in Audi A3 8V - my trunk door should be lighter than the one in Passat.
Trunk module
- 5Q0-959-107-F /K from VW Passat B8
- xxx-xxx-xxx from Audi Q2 or Q3 ?
Trunk lock
- 81A-827-506 from Audi Q2 and Q3
Wiring
- 3G5-971-147-AP from VW Passat B8
- xxx-xxx-xxx from Audi Q2 and Q3?
Buttons
I want to have while backlight in both the trunk closing button (trunk door) and trunk opening button (drivers door).
- xxx-xxx-xxx from Audi A3 8V facelift
- xxx-xxx-xxx from Audi Q2 and Q3?
Kick-open sensor
This is optional.
- 3G0-962-243[2]
Warning buzzer
- xxx-xxx-xxx ???
Installation
TODO
Coding & adaptation
TODO
Basic settings
TODO